Mechanics
Profile and section comparator
Active tool for comparing profiles from geometry, Section Builder imports or manually entered properties with a shared load case, mass, W, My, Mallow, Fallow and mass-normalized indicators.
Loading tool…
Active tool for comparing profiles from geometry, Section Builder imports or manually entered properties with a shared load case, mass, W, My, Mallow, Fallow and mass-normalized indicators.
Report an error, translation issue, or idea. The form will not change this page's inputs or result.
Compares profiles from geometry, Section Builder imports or manually entered properties. Results are preliminary and are not code-based profile selection.
Parametric profile mass per length is calculated as A · density.
Parametric profiles are idealized geometries, not automatically assigned commercial profiles.
| Name | Mass | Selected W | My | Mallow | Stress | Utilization | Status | Actions |
|---|---|---|---|---|---|---|---|---|
| 43.96 kg/m | 277,866.7 mm³ | 98.64 kN·m | 65.76 kN·m | 17.99 MPa | 7.6 % | Meets simplified criterion | ||
| 3.55 kg/m | 14,545.3 mm³ | 5.16 kN·m | 3.44 kN·m | 343.75 MPa | 145.25 % | Does not meet simplified criterion | ||
| 22.2 kg/m | 57,962.4 mm³ | 20.58 kN·m | 13.72 kN·m | 86.26 MPa | 36.45 % | Meets simplified criterion |
Idealized geometry; it does not automatically represent a specific commercial profile.
Saves or restores the complete comparison session. This is not the import of one Section Builder profile.