Calculator catalog
Choose a category or search by quantity, component or engineering topic.
Found 15 calculators
Spindle speed from cutting speed
Calculates spindle speed from cutting speed and tool or workpiece diameter.
Cutting speed from spindle speed
Calculates cutting speed from diameter and spindle speed.
Feed rate from feed per revolution
Calculates feed rate from feed per revolution and spindle speed.
Machining power from force and speed
Calculates ideal cutting power as main cutting force multiplied by cutting speed.
Cutting power from MRR
Calculates helper cutting power from specific cutting energy and material removal rate.
Grinding wheel peripheral speed
Calculates grinding wheel peripheral speed from wheel diameter and rotational speed, or the reverse.
Taylor tool life
Calculates simplified tool life from Taylor's equation using constant, cutting speed, and exponent.
Taylor tool life
Calculates simplified tool life from Taylor's equation using constant, cutting speed, and exponent.
Machining cost per part with tool life
Estimates tool and machine cost per part from machining time and tool life.
EDM material removal rate
Calculates volumetric and mass EDM removal rate from mass loss, density, and machining time.
EDM electrode wear ratio
Calculates electrode loss, volumetric electrode wear rate, and volumetric EWR relative to removed workpiece volume.
EDM side gap and overcut
Calculates diametral overcut and radial side gap from electrode and measured hole diameters.
EDM hole taper
Calculates top and bottom gaps and geometric hole taper from two diameters and depth.
ECM current density
Calculates current density from current and active current-carrying area.
ECM Faraday material removal rate
Calculates theoretical and actual ECM mass and volumetric removal rates from Faraday's law, current efficiency, and material data.